• Squared-off treated pine logs 64 mm x 241 mm (3" x 10") planed and pre-soaked.
• Treated pine columns planed and pre-soaked (same thickness as logs).
• Keys 16 mm x 64 mm (1" x 3")
• Anchoring System at the bottom of each column.
• Weather-tight gasket on subfloor (under the flashing)
• Metal flashing under the first row of logs.
• Galvanized corrugated iron strip under the first row of logs.
• Outside T-shaped moulding each side of columns.**
• 16 mm x 64 mm (lin x 3 in.) furring behind the log wall.
• Weather-tight paper behind the log wall and for upper walls.
• Wall framing 38 mm x 140 mm (2" x 6") studs for 600 mm (24") spacing behind the log wall.**
• Inside drop siding behind the log wall except on service room and bedroom walls (as indicated on price list).**
• 25 mm x 25 mm (1-1/8" x 1-1/18") inside moulding in corners where drop siding is required.**
• * Wood beams S4S supporting the second floor with a maximum spacing of 1,2 m (4').
• * 38 mm (2") tongued and grooved pine boards for the second floor.
• * 38 mm x 140 mm (2" x 6") plate on the upper subfloor.**
• Prefab trusses for 600 mm (2') spacing. **
• 89 mm x 241 mm (4" x 10" ) eaves decorative supports (for Mountain Lodge Classic version only).
• * Upper wall framing, 38 mm x 140 mm (2" x 6" studs for 610 mm (2') spacing. **
• * Prefab dormers. ** (As per plan)
• Roof sheathing, 12,5 mm x 1220 mm x 2440 mm (1/2" x 4" x 8") standard type spruce plywood panels.
• 38 mm x 89 mm (2" x 4") lookout rafters, 610 mm (24") spacing for gable and overhang roof.**
• Facia board, 29 mm x 140 mm (1-1/4" x 6") pine board along the roof edge.**
• 16 mm (1") Tongue and groove pine boards for upper and dormer wall siding.**
• 16 mm x 64 mm (1" x 3") Furrings behind upper and dormer wall siding.
• 16 mm (1") Tongue and groove pine boards for roof overhang soffit.**
• Bulls-eye (decorative frame for ventilation).
• 3 coats of stain for outside part of logs, siding and frieze soffit.
• All nails and metal straps required for the log wall mounting.
• Shoring studs twenty 3,7 m x 38 mm x 89 mm (12' x 2" x 4") and six 3,7 m x 38 mm x 140 mm
• (12' x 2" x 6").**
• Plywood sheets 12,5 mm x 1220 mm x 2440 mm (1/2" x 4' x 8') for exterior upper walls.
  

* For 2 storey houses.
** Kiln dried wood.